動作品！[Solaris11.4]1Uサーバ Oracle Sparc M10-1 (2コア アクティブコア SPARC64-X+ 2.80G /32GB/2.5inch 300GB SAS*2)

商品 メーカー：富士通/ORACLE
型番 ：SPARC M10-1
CPU ：SPARC64 X+ 2.80G (2Core-Activation)　
RAM ：32GB (8GB×4)
HDD ：300GB SAS*2 (マウンタはPRIMERGY 互換品)
OS: Solaris 11.4 インストール済

ネットワーク1000Base-T LAN × 4
オプションPCIカード: 8Gファイバチャンネルカードx2、1G QUAD LANカード　x1

商品状態: 完全動作品、OSまで起動エラーなし
Solaris11.4インストール済
XSCFユーザー作成済、ログイン可能

外観:目立った傷や汚れありません。


XSCF> showhardconf -u
SPARC M10-1; Memory_Size:32 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU | 1 |
| Type:A | ( 1) |
| CPU | 1 |
| Freq:2.800 GHz; | ( 1) |
| MEM | 4 |
| Type:04; Size: 8 GB; | ( 4) |
| PCICARD | 3 |
| LINKCARD | 0 |
| PCIBOX | 0 |
| IOB | 0 |
| LINKBOARD | 0 |
| PCI | 0 |
| FANBP | 0 |
| PSU | 0 |
| FAN | 0 |
| OPNL | 1 |
| PSUBP | 1 |
| PSU | 2 |
| FANU | 7 |
+-----------------------------------+------------+
XSCF>
XSCF> showstatus
XSCF>



XSCF> poweron -p0 -y
PPAR-IDs to power on :00
Continue? [y|n] :y
00 : Powering on

*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showpparprogress".
XSCF> console -p0 -y

Console contents may be logged.
Connect to PPAR-ID 0?[y|n] :y
POST Sequence 01 Banner
LSB#00: POST 3.13.0 (2016/10/14 09:37)
POST Sequence 02 CPU Check
POST Sequence 03 CPU Register
POST Sequence 04 STICK Increment
POST Sequence 05 Extended Instruction
POST Sequence 06 MMU
POST Sequence 07 Memory Initialize
POST Sequence 08 Memory Address Line
POST Sequence 09 MSCAN
POST Sequence 0A Cache
POST Sequence 0B Floating Point Unit
POST Sequence 0C Encryption
POST Sequence 0D Cacheable Instruction
POST Sequence 0E Softint
POST Sequence 0F CPU Cross Call
POST Sequence 10 CMU-CH
POST Sequence 11 PCI-CH
POST Sequence 12 TOD
POST Sequence 13 MBC Check Before STICK Diag
POST Sequence 14 STICK Stop
POST Sequence 15 STICK Start
POST Sequence 16 Barrier Blade
POST Sequence 17 Single Barrier Bank
POST Sequence 18 Sector Cache
POST Sequence 19 SX
POST Sequence 1A RT
POST Sequence 1B RT/SX NC
POST Sequence 1C RT/SX Interrupt
POST Sequence 1D RT/SX Barrier
POST Sequence 1E Error CPU Check
POST Sequence 1F System Configuration
POST Sequence 20 System Status Check
POST Sequence 21 Start Hypervisor
POST Sequence Complete.

Hypervisor version: @(#)Hypervisor 1.4.12 2016/12/15 09:54 1.4.11+3

Configuring System Board.... .Completed.

Starting Logical Domains....

NOTICE: Entering OpenBoot.
NOTICE: Fetching Guest MD from HV.
NOTICE: Starting additional cpus.
NOTICE: Initializing LDC services.
NOTICE: Probing PCI devices.
NOTICE: Finished PCI probing.


SPARC M10-1, No Keyboard
Copyright (c) 1998, 2016, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.38.5, 30.2500 GB memory available, Serial #268894928.
[ 2.21.0 ]
Ethernet address b0:99:28:a0:59:d0, Host ID: 900702d0.




{0} ok probe-scsi-all
/pci@8100/pci@4/pci@0/pci@9/QLGC,qlc@0
QLogic QLE2560 Host Adapter FCode(SPARC): 2.04 12/03/08
Firmware version 4.06.02
Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate
SFP state: 8Gb Present

/pci@8000/pci@4/pci@0/pci@8/QLGC,qlc@0
QLogic QLE2560 Host Adapter FCode(SPARC): 2.04 12/03/08
Firmware version 4.06.02
Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate
SFP state: 8Gb Present

/pci@8000/pci@4/pci@0/pci@2/pci@0/usb@4,1/storage@1
Unit 0 Removable Read Only device BUFFALO Optical Drive BFT6

/pci@8000/pci@4/pci@0/pci@0/scsi@0

FCode Version 1.00.56, MPT Version 2.00, Firmware Version 13.00.66.00

Target a
Unit 0 Disk HGST HUC156030CSS204 C3Z0 585937500 Blocks, 300 GB
SASDeviceName 5000cca05b3d4980 SASAddress 5000cca05b3d4981 PhyNum 0
Target b
Unit 0 Disk HGST HUC156030CSS204 C3Z0 585937500 Blocks, 300 GB
SASDeviceName 5000cca05b3515a4 SASAddress 5000cca05b3515a5 PhyNum 1
Target c
Unit 0 Encl Serv device FUJITSU NBBEXP 0d32
SASAddress 500000e0e04984fd PhyNum 14




Boot device: /pci@8000/pci@4/pci@0/pci@0/scsi@0/disk@w5000cca05b3d4981,0:a File and args:
SunOS Release 5.11 Version 11.4.0.15.0 64-bit
Copyright (c) 1983, 2018, Oracle and/or its affiliates. All rights reserved.
Loading smf(7) service descriptions: 238/238
Booting to milestone "svc:/milestone/config:default".
Configuring devices.
Loading smf(7) service descriptions: 2/2
Booting to milestone "all".
Hostname: solaris
Aug 8 11:25:36 solaris sendmail[1438]: My unqualified host name (solaris) unknown; sleeping for retry
Aug 8 11:25:36 solaris sendmail[1449]: My unqualified host name (solaris) unknown; sleeping for retry

solaris console login:
SUNW-MSG-ID: SMF-8000-YX, TYPE: Defect, VER: 1, SEVERITY: Major
EVENT-TIME: Tue Aug 8 11:25:40 JST 2023
PLATFORM: ORCL,SPARC64-X, CSN: PZ31317037, HOSTNAME: solaris
SOURCE: software-diagnosis, REV: 0.2
EVENT-ID: 56fe3c6d-4d3c-4ce3-8fdd-94559d0cf58f
DESC: Service svc:/milestone/goals:default failed - goal service has dependencies that cannot be satisfied without administrative intervention.
AUTO-RESPONSE: The service has been placed into the maintenance state.
IMPACT: svc:/milestone/goals:default is unavailable.
REC-ACTION: Run 'svcs -xv svc:/milestone/goals:default' to determine the generic reason why the service failed, the location of any logfiles, and a list of other services impacted. Please refer to the associated reference document at http://support.oracle.com/msg/SMF-8000-YX for the latest service procedures and policies regarding this diagnosis.
Aug 8 11:26:36 solaris sendmail[1438]: unable to qualify my own domain name (solaris) -- using short name
Aug 8 11:26:36 solaris sendmail[1449]: unable to qualify my own domain name (solaris) -- using short name

solaris console login: root
Password:
NOTE: system has 1 active defect; run 'fmadm list' for details.
Aug 8 11:26:56 solaris login: ROOT LOGIN /dev/console
Oracle Corporation SunOS 5.11 11.4 Aug 2018
root@solaris:~#